AbraSilver Intersects 171 g/t AgEq (2.3 g/t AuEq) Over 64.5m in Oxides at Diablillos | News Direct

AbraSilver Intersects 171 g/t AgEq (2.3 g/t AuEq) Over 64.5m in Oxides at Diablillos

News release by AbraSilver Resource Corp.

facebook icon linkedin icon twitter icon pinterest icon email icon Toronto, Ontario | October 05, 2021 07:30 AM Eastern Daylight Time

 

 Separate Intersection of High-Grade Gold-Copper Sulphide Mineralisation: 3m at 5.1 g/t Au & 6.75% Cu 

 

 Toronto - TheNewswire - October 05, 2021: AbraSilver Resource Corp. (TSX.V:ABRA) (OTC:ABBRF) ("AbraSilver" or the “Company”)  is pleased to report new drill results from the latest diamond drill holes of the Company’s ongoing Phase II drill program, on its wholly-owned Diablillos property in Salta Province, Argentina.  

 

 Hole DDH 21-040 was a step-out hole drilled to test the northeast extension of the Oculto system approximately 150 meters beyond the open pit margin.  Hole DDH 21-044 was a step-out hole testing a previously underexplored breccia zone along the northern edge of the Oculto system, and hole DDH 21-045 tested the southwest extension of the Measured Resource shell boundary along strike from the high-grade Tesoro Zone. Assay results from the key highlight holes are summarized in Table 1, with results from all additional holes included in Table 2 below.  

 

 Table 1 – Drill Results of Highlight Holes  

 

 (Intercepts greater than 2,000 gram-meter AgEq shown in bold text): 

 

Drill Hole

 

From (m)

To (m)

Type

Interval (m)

Ag

 g/t

Au g/t

Cu

%

AgEq1 g/t

AuEq1 g/t

DDH-21-040

 

168

177

Oxides

9.0

55.0

0.95

-

126.3

1.68

DDH-21-040

 

204

219

Oxides

15.0

179.8

0.68

-

230.8

3.08

DDH-21-040

Including

209

214

Oxides

5.0

494.3

1.81

-

630.1

8.40

DDH-21-040

 

272

275

Sulphides

3.0

79.0

5.12

6.75

1,157.3

15.43

DDH-21-044

 

55

67

Oxides

12.0

104.4

-

-

104.4

1.39

DDH-21-044

 

101

143

Oxides

42.0

87.1

0.82

-

148.6

1.98

DDH-21-044

Including

112

133

Oxides

21.0

110.5

1.40

-

215.5

2.87

DDH-21-045

 

26

32

Oxides

6.0

18.1

0.97

-

90.9

1.21

DDH-21-045

 

108

172.5

Oxides

64.5

125.6

0.61

-

171.4

2.28

DDH-21-045

Including

111

115

Oxides

4.0

83.0

0.94

-

153.5

2.05

DDH-21-045

Including

119

131

Oxides

12.0

206.6

2.20

-

371.6

4.95

DDH-21-045

Including

162

168

Oxides

6.0

287.5

0.12

-

296.5

3.95

 

 Note:  All results in this news release are rounded. Assays are uncut and undiluted. Widths are drilled widths, not true widths. True widths are estimated to be approximately 80% of the interval widths. 

 

 1 AgEq & AuEq calculations for reported drill results are based on USD $20.00/oz Ag, $1,500/oz Au and $3.00/lb Cu. The calculations assume 100% metallurgical recovery and are indicative of gross in-situ metal value at the indicated metal prices. Refer to Technical Notes below for additional information. 

 

 John Miniotis, President and CEO, commented, “Our Phase II drill program continues to return strong grades over broad widths, confirming and expanding the known gold and silver mineralized zones.  Hole DDH 21-045 reinforces and extends the higher grade mineralisation in the existing Measured Resource shell, while holes DDH 21-040 and DDH 21-044 demonstrate the extension of substantial mineralisation for hundreds of meters beyond the open pit boundary in the Oculto Northeast and North Zones.   

 

 Figure 1 – Drill Hole Location Map  

 

 

Click Image To View Full Size 

 

 Discussion of Drill Hole Results 

 

 Hole DDH 21-040 was a step-out hole drilled to test the extension of the Oculto system and intersected substantial high-grade silver, gold and copper mineralisation beyond the open pit in the northeast zone. 

 

 The hole successfully intersected several zones of oxide and sulphide mineralisation, with 15 meters of oxide mineralisation grading 179.8 g/t silver and 0.68 g/t gold from 204 to 219 meters, including 5 meters grading 494.3 g/t silver and 1.81 g/t gold from 209 to 214 meters.   The deeper portion of the hole intersected a high-grade sulphide intercept of 3 meters grading 79.0 g/t silver, 5.12 g/t gold and 6.75% copper from 272 to 275 meters. 

 

 Hole DDH 21-044 was a step-out hole which tested a previously underexplored breccia zone along the northern edge of the Oculto system. This hole intersected shallow mineralization in oxides with 42 meters grading 87.1 g/t silver and 0.82 g/t gold from 101 to 143 meters, including 21 meters grading 110.5 g/t silver and 1.40 g/t gold from 112 to 133 meters. The encouraging results of this hole, opens a new area of potential mineralisation which will be systematically drilled in the near future.   

 

  

 

 Hole DDH 21-045 tested the southwest extension of the Measured Resource along strike from the high-grade Tesoro Zone. The hole successfully intersected a broad interval of 64.5 meters grading 125.6 g/t silver and 0.61 g/t gold from 108 to 172.5 meters, including 12 meters grading 206.6 g/t silver and 2.20 g/t gold from 119 to 131 meters.  These results reinforce and extend the high-grade mineralisation in the Measured Resource area towards the west.    

   

 Figure 2 – Cross Section (Looking East) with Highlighted intercepts in Hole DDH 21-040  

 

 

Click Image To View Full Size 

  

 Figure 3 - Cross Section (Looking East) with Highlighted intercepts in Holes DDH 21-044 and DDH 21-045   

 

 

Click Image To View Full Size 

 

 Table 2 – Drill Result Highlights of Holes DDH 21-040 - DDH 21-045  

 

Drill Hole

Zone 

From (m)

To (m)

Type

Interval (m)

Ag

 g/t

Au g/t

Cu

%

DDH-21-040

Northeast

168

177

Oxides

9.0

55.0

0.95

-

  

204

219

Oxides

15.0

179.8

0.68

-

  

209

214

Oxides

5.0

494.3

1.81

-

  

272

275

Sulphides

3.0

79.0

5.12

6.75

DDH-21-043

Far East

26

28

Oxides

2.0

-

0.7

-

  

33

34

Oxides

1.0

-

2.2

-

  

39

42

Oxides

3.0

-

1.2

-

  

99.5

100.5

Oxides

1.0

-

0.7

-

DDH-21-044

North

55

67

Oxides

12.0

104.4

-

-

  

101

143

Oxides

42.0

87.1

0.82

-

  

112

133

Oxides

21.0

110.5

1.40

-

DDH-21-045

Tesoro

26

32

Oxides

6.0

18.1

0.97

-

  

108

172.5

Oxides

64.5

125.6

0.61

-

  

111

115

Oxides

4.0

83.0

0.94

-

  

119

131

Oxides

12.0

206.6

2.20

-

  

162

168

Oxides

6.0

287.5

0.12

-

  

 Collar Data  

 

Hole Number

UTM Coordinates

Elevation

Azimuth

Dip

Depth

DDH 21-040

E720291

N7199605

4,263

0

-60

282

DDH 21-041

E721212

N7201689

4,149

0

-90

215.5

DDH 21-042

E721100

N7202023

4,145

0

-90

203.6

DDH 21-043

E721621

N7199940

4,438

0

-60

150

DDH 21-044

E720097

N7199449

4,239

0

-60

176

DDH 21-045

E720095

N7199237

4,228

0

-60

221

 

 About Diablillos 

 

 The 80 km2 Diablillos property is located in the Argentine Puna region - the southern extension of the Altiplano of southern Peru, Bolivia, and northern Chile - and was acquired from SSR Mining Inc. by the Company in 2016.  There are several known mineral zones on the Diablillos property, with the Oculto zone being the most advanced with approximately 90,000 meters drilled to date.  Oculto is a high-sulphidation epithermal silver-gold deposit derived from remnant hot springs activity following Tertiarty-age local magmatic and volcanic activity. Comparatively nearby examples of high sulphidation epithermal deposits include: Yanacocha (Peru); El Indio (Chile); Lagunas Nortes/Alto Chicama (Peru) Veladero (Argentina); and Filo del Sol (Argentina) 

        

 Table 3 - 2021 Mineral Resource Estimate for the Oculto Deposit, Diablillos Project 

 

Category

Tonnage

(000 t)

Ag

(g/t)

Au

(g/t)

Contained Ag

(000 oz Ag)

Contained Au

(000 oz Au)

Measured

8,235

124

0.98

32,701

259

Indicated

32,958

54

0.70

57,464

744

Measured & Indicated

41,193

68

0.76

90,165

1,002

Inferred

2,884

34

0.7

3,181

66

 

 Effective September 8, 2021. The resource estimate is N.I. 43-101 compliant. Full details of the Mineral Resources are available in a Company news release dated September 15, 2021.  The full technical report, which is being prepared in accordance with National Instrument 43-101 - Standards of Disclosure for Mineral Projects (“NI-43-101”) by Mining Plus, will be available on SEDAR (www.sedar.com) under the Company’s issuer profile within 45 days of the news release dated September 15, 2021. 

 

 QA/QC and Core Sampling Protocols  

 

 AbraSilver applies industry standard exploration methodologies and techniques, and all drill core samples are collected under the supervision of the Company’s geologists in accordance with industry practices. Drill core is transported from the drill platform to the logging facility where drill data is compared and verified with the core in the trays. Thereafter, it is logged, photographed, and split by diamond saw prior to being sampled. Samples are then bagged, and quality control materials are inserted at regular intervals; these include blanks and certified reference materials as well as duplicate core samples which are collected in order to measure sample representivity. Groups of samples are then placed in large bags which are sealed with numbered tags in order to maintain a chain-of-custody during the transport of the samples from the project site to the laboratory. 

 

 All samples are received by the SGS offices in Salta who then dispatch the samples to the SGS preparation facility in San Juan. From there, the prepared samples are sent to the SGS laboratory in Lima, Peru where they are analyzed. All samples are analyzed using a multi-element technique consisting of a four acid digestion followed by ICP/AES detection, and gold is analyzed by 50g Fire Assay with an AAS finish. Silver results greater than 100g/t are reanalyzed using four acid digestion with an ore grade AAS finish. 

 

 Qualified Persons 

 

 David O’Connor P.Geo., Chief Geologist for AbraSilver, is the qualified person as defined by National Instrument 43-101 Standards of Disclosure for Mineral Projects, has reviewed and approved the scientific and technical information in this news release. 

 

 Technical Notes 

 

 All results in this news release are rounded. Assays are uncut and undiluted. Intervals are drilled widths, not true widths. AgEq calculations for reported drill results are based on USD $20.00/oz Ag, $1,500/oz Au and $3.00/lb Cu. The calculations assume 100% metallurgical recovery and are indicative of gross in-situ metal value at the indicated metal prices.  No metallurgical testwork has yet been completed on the recovery of copper. 

 

 About AbraSilver 

 

 AbraSilver is a well-funded silver-gold focused advanced-stage exploration company. The Company is rapidly advancing its 100%-owned Diablillos silver-gold project in the mining-friendly Salta province of Argentina, which has a Measured and Indicated resource base of over 160Moz on a silver-equivalent basis or 2.3Moz on a gold-equivalent basis.  The Company is led by an experienced management team and has long-term supportive shareholders including Mr. Eric Sprott and SSR Mining.  In addition, AbraSilver owns a portfolio of earlier-stage copper-gold projects, including the Arcas project in Chile where Rio Tinto has an option to earn up to a 75% interest by funding up to US$25 million in exploration.  AbraSilver is listed on the TSX-V under the symbol “ABRA” and in the U.S. under the symbol “ABBRF”. 

 

 For further information please visit the AbraSilver Resource website at www.abrasilver.com, our LinkedIn page at AbraSilver Resource Corp., and follow us on Twitter at www.twitter.com/abrasilver 

 

 Alternatively please contact: 

 

 John Miniotis, President and CEO 

 

 john@abrasilver.com 

 

 Tel: +1 416-306-8334 

 
  
 

 Cautionary Statements 

 

 This news release includes certain "forward-looking statements" under applicable Canadian securities legislation. Forward-looking statements are necessarily based upon a number of estimates and assumptions that, while considered reasonable, are subject to known and unknown risks, uncertainties, and other factors which may cause the actual results and future events to differ materially from those expressed or implied by such forward-looking statements. All statements that address future plans, activities, events or developments that the Company believes, expects or anticipates will or may occur are forward-looking information. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements. The Company disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law. 

 

 The Diablillos resource estimate is N.I. 43-101 compliant. Full details of the Mineral Resources are available in a Company news release dated September 15, 2021.  The full technical report, which is being prepared in accordance with National Instrument 43-101 - Standards of Disclosure for Mineral Projects (“NI-43-101”) by Mining Plus, will be available on SEDAR (www.sedar.com) under the Company’s issuer profile within 45 days of the news release dated September 15, 2021. 

 

 Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release